www.abnova.com
9
1. Press the button or to select key-in position and return to “
”. Then press the button to confirm it.
2.
Time setting
: Press the button or
to change the digits from 0 to 9,
then press the button to confirm it.
3. UV Lamp ON/OFF: Press the button to turn on or the button to turn
off UV Lamp.
VI. Perform Program Screen
PROGRAM
: It shows the name of program.
PRESENT(℃) : Real working temperature. It shows “
NC”, when there is no connection
with thermal couple.
PRESET(℃) : Preset working temperature. It shows “
NA”, when there is no preset
input.
STATUS : It shows the machine being what kind of status.
END
: The program is finished.
RUNNING
: The program is progressing.
PAUSE
: To make a short stop.
HOME
: Go to the initial site.
STOP?
: Do you want to stop program?
JOG
: To move robot slowly.
LIMIT
: The site of robot is out off the limited range.
SENSOR
: It is fault to detect the initial site.
TEMP MAX : Real temperature is higher than over-temperature protection.
(80℃)
TEMP ALM : It can not be reached preset temperature in a reasonable
period. (30min)
: (1) If it shows
LIMIT or
SENSOR, it means the machine is out of order. And
buzzer will keep on ringing. Press the button to stop the buzzer. Turn
