12
190924_REV.2
V. Installation
1. Assemble
Fix Motor and Base plate with fixing screws.
Controller and Motor is compatible with two types Base plate:
6ch. Base plate for 5mL (Product No. BWS-S005N0S-6A)
6ch. Base plate for 30/100mL (Product No. BWS-S03N0S-6B)
NB: When assembling Motor and Base plate or changing a device, must be
power off.
NB: Tighten the fixing screw by hand. DO NOT use tools.
NB: Always grip Base plate when transporting. DO NOT grip Motor.
2. Installation space
Base plate and Motor: W150
×
D300
×
H150 mm (inside the incubator)
Controller: W140
×
D150
×
H40 mm (It can be installed on the side panel)
The controller has a magnet sheet on the bottom of the case, so it can be
mounted onto the side panel of the incubator.
