6
Ablaze Back-lit Mirrors should be installed and tested by a qualified electrician and in
accordance with current local regulations. Where possible the Ablaze Back-Lit Mirror
should be screwed into studs or other suitable dry wall anchors, if fixing to hollow
walls suitable anchors should be used.
Please read and understand this installation guide in before commencing installation.
If you have any queries in regards to installation, please call 1300 368 631.
•
Observe and adhere to electrical guidelines when placing your Ablaze Back-Lit
Mirror in wet areas
•
Ensure any timers or switches used are installed in correct zones according to the
IP rating of the timer/switch.
For best results clean mirrors with methylated spirits and water at a rate of 30%
methylated spirits and 70% water. Do not use Windex or similar chemical cleaning
products. Avoid getting water on the sides or back of the mirror as damage to the silver
backing can occur. In coastal areas it is recommended to wipe around the edge of the
mirror once a month to avoid salt build up that can cause silver creep.
Safety & Care Information
