ABL eMH1 513, Инструкция по эксплуатации, Страница: 11 / 20

IntroductIon Product overvIew
3
Product overview
Description
The charging station allows safe and convenient charging of electric vehicles in ac-
cordance with IEC 61851-1, Mode 3. In this mode, the charging station ensures that
the vehicle is only supplied with electrical energy if the vehicle is connected properly.
EVSE 513 charging station scope of delivery (Fig. A)
• Charging station with lower housing A1, upper housing A2 and housing cover A3
with lock A4
• Connected charging cable with coupler (A5)
• Two keys
• Assembly and operating manual
• Drilling template
Residual direct current (‘DC residual current’)
Warning!
When charging an e-vehicle, sometimes a DC residual current will flow
from the charging device into the electrical installation of the building. This
could affect the reliability of the built-in or external circuit breaker (RCCB
Type A) during the charging process.
A non-functional RCCB cannot detect alternating residual currents in the
electrical installation of the building etc. and is therefore unable to short-cir-
cuit and protect against life-threatening electric shocks and serious injuries.
• Only electrical vehicles equipped with a residual current protective device may
be connected to this charging station. Never connect e-vehicles to the charging
station if they are not equipped with such a protection.
• Before charging an electric vehicle, always check whether the vehicle is equipped
with a residual current protective device. Information about DC residual current
protection can be found in the vehicle’s instruction manual (such as in the case of