ABL AIP-2MBV, Быстрый старт, Страница: 13 / 22

9
2.3 Lens Adjustment
Turn counter clockwise to remove the lens cover, now you can see the iris front and rear control
rod. The front control rod is to focus and the rear control rod is to zoom. See Figure 2-5. Please
turn clockwise to fix the lens cover back firmly.
Important

Please remove the sunshield first and remove the lens cover if you can not unfasten the lens
cover.

The lens cover has the waterproof function. Please make sure it is secure after you
complete the lens adjustment.
Figure 2-5 Lens adjustment
2.4 Bracket Adjustment
You can use an inner hex screw to control the bracket. Please use the inner hex wrench from the
installation accessories bag to unfasten the screw. Please refer to Figure 2-6 or Figure 2-7
according to the actual product. The horizontal angle of the rear cover can rotate 360°, the tilt
angle can rotate 90° and the chassis can rotate 360°.
Please use the inner hex wrench to firmly secure the inner hex screw after you complete the
setup.
Important

Please make sure the M4 inner hex screw or M4 inner hex flat tight screws are firm,
otherwise it may result in chassis vibration and the camera cannot fix to a specified angle.