ABL AIP-2MBV, Быстрый старт, Страница: 11 / 22

7
Figure 2-2 Device installation 2
2.2 Micro SD Card Installation
Use the inner hex wrench from the installation accessories bag to remove the four inner hex
screws from the rear cover. Please refer to Figure 2-3 or Figure 2-4 to find the Micro SD card slot
position according to the actual product. Insert the Micro SD card and the fix the four screws of
the rear cover.
Important

Please make sure the cable connection between the power board and the main board is firm.
Otherwise, it may result in device malfunction.

The rear cover of the device adopts the waterproof design. Please secure four screws firmly
after you complete the Micro SD card installation.