ABK PA2089T, Руководство пользователя

Страница: 5 / 8

5
Main interface
l
Power supply 1, 2, 3 and 4 The output operating status of rear panel CH1, 2, 3 and 4, with the
flashing for the forced insertion status;
l
Week: Hour: minute: second The present specific week day and time (24 hours system);
l
Next timer point: The specific week day and time (24 hours system) of the latest
programmable timer point;
l ！
The present valid alarm signal input of the rear panel ports ALM1 IN
or ALM2 IN ;
l
The controlled peripheral equipment CD is playing at present;
l
The controlled peripheral equipment tuner is playing at present;
l
The controlled peripheral equipment player deck is playing at
present;
l
The controlled peripheral equipment digital recorder is playing at
present;
l
CHIME OUT port at the rear panel with chime signal output at
present.
Programming
l
Programming operation Press DIGITAL WHEEL to enter operation entry interface at the main
display interface.
1. Adjusting time Operation entry interface has four entries : Timer programming, adjusting time,
duplicate timer and exit setup . Rotate the digital wheel to select the adjusting time entry , pressing
digital wheel again to enter the interface for adjusting time . Rotate the digital wheel to select the entry
to be adjusted, press the digital wheel to make the cursor of
▲▼
appeared behind the entry; Then
rotate the digital wheel to adjust the parameter, and press the digital wheel to exit from the adjusting.
Press the confirm entry after adjusting properly the other parameters following the method given above,
the adjustment made will take effect right away and the system will return back to the operation entry
interface; Press the cancel entry, all the adjustment will be invalid and the system will return back to
the operation entry interface. Press the exit setting entry of the operation entry interface to return
Power 1 ON 2 OFF 3 ON 4 OFF
Friday 13 : 38 : 26
Next timer point: 17:30 Friday