erstellt:
geändert:
HF Transceiver Sender CSxxxTRT-1-1
Name:
ORD
MK
mit Rückmelde-Funktion
Datum:
02.02.2015
25.07.2019
Art.-Nr.: KH66983xxx61.A
Seite
9
von
9
05 Integration instructions for host product manufacturers
according to KDB 996369 D03 OEM Manual v01
2.2 List of applicable FCC rules
Part 90
2.3 Specific operational use conditions
This module is approved for use in portable and mobile applications. Integrators must supply
operating instructions for end users and installers to satisfy RF exposure compliance requirements
are met. Integrators and installers must also make sure that compliance with Part 15B are ensured.
2.4 Limited module procedures
N/A, this module is not compliant with Chapter (b) from §15.212.
2.5 Trace antenna designs
N/A, the module does not use a trace antenna, it uses an external dipole antenna.
2.6 RF exposure considerations
WARNING:
The 456TR1 device radiates radio frequency energy at a level below the United
States FCC radio frequency exposure limits. Nevertheless, this device should be used in such a
manner that the potential for human contact during normal operation is minimized. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC
peripheral requirements, etc.).
2.7 Antennas
Antenna is named with IANT419458. It´s a168mm long wire antenna with a MMCX-Connector
and connected to the RF-part CS456 TRT-1
