Appendix F
F-2
2
Example 2: With a system including the mainboard (with CPU, DRAM, COAST...)
HDD, CD-ROM, FDD, VGA CARD, LAN CARD, MPEG CARD,
SCSI CARD, SOUND CARD, after assembly and after having
installed the Sound Card Driver, when you restart the system, when it
runs the Sound Card Driver, it resets automatically. This problem may
be due to the Sound Card Driver. During the Starting DOS
…
procedure, press SHIFT (BY-PASS) key, to skip CONFIG.SYS and
AUTOEXEC.BAT; edit CONFIG.SYS with a text editor, and in front
on the line that loads the Sound Card Driver, add a remark REM, in
order to disable the Sound Card Driver. See the example below.
CONFIG.SYS:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE HIGHSCAN
DOS=HIGH,UMB
FILES=40
BUFFERS=36
REM DEVICEHIGH=C:\PLUGPLAY\DWCFGMG.SYS
LASTDRIVE=Z
Restart the system. If the system starts and does not reset, you can be
sure that the problem is due to the Sound Card Driver. Note down the
Sound Card model, mainboard model, BIOS identification number on
the technical support file (refer to main instructions), and describe the
problem in the space provided.
JJJ
Содержание PX5
