NF-M2P/NF-M2S/NF-M2SV
13
1.8.2 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA
device by SATA cable.
NF-M2P:
NF-M2S/NF-M2SV:
To connect SATA device:
1. Attach either end of the signal cable to the SATA connector on
motherboard. Attach the other end to the SATA device.
2. Attach the SATA power cable to the SATA device and connect the
other end from the power supply.
※
The motherboard in
this photo is served for
DEMO only, and may
not be the same type or
model as the one
described in this
manual.
1.8.3 Additional USB 2.0 Port Headers
Each header supports 2x additional USB 2.0 ports by connecting
bracket or cable to the rear I/O panel or the front-mounted USB ports
of your chassis.
NF-M2P:
