Abit KV7, Руководство пользователя

Страница: 38 / 72

3-12 Chapter 3
AGP Aperture Size:
This option specifies the amount of system memory that can be used by the AGP device. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address space.
AGP Data Transfer Rate:
This item selects the data transfer rate of AGP device. A higher rate delivers faster and better graphics to
your system. Make sure your graphics card supports the mode you select.
AGP Fast Write:
Two options are available: Disabled Enabled. The default setting is Disabled . If your AGP adapter can
support this function, then you can choose Enabled . Otherwise, choose Disabled .
AGP Master 1 WS Write:
Two options are available: Disabled Enabled. The default setting is Disabled . This implements a
single delay when writing to the AGP Bus. When you set it to Enabled , two-wait states are used by the
system, allowing for greater stability.
AGP Master 1 WS Read:
Two options are available: Disabled Enabled. The default setting is Disabled . This implements a
single delay when reading to the AGP Bus. When you set it to Enabled , two-wait states are used by the
system, allowing for greater stability.
AGP 3.0 Calibration cycle:
Leave this item to its default setting.
AGP Driving Control:
Leave this item to its default setting.
AGP Driving Value:
Leave this item to its default setting.
AGP Pad Drive Delay:
Leave this item to its default setting.
AGP Strob Drive Strength:
Leave this item to its default setting.
KV7 Series