Abit IB9, Руководство пользователя

Страница: 43 / 100

BIOS Setup
IB9 2-19
- FanEQ Start Control
This item sets the speed ratio for the 3-pin CPU fan assembly connected at “CPUFAN1” fan
power connector to start running.
- FanEQ Stop Control
This item sets the lowest speed ratio for the 3-pin CPU fan assembly connected at “CPUFAN1”
fan power connector to run at when the CPU temperature detected is lower than the value of
item “FanEQ Target Temp.” plus the value of item “FanEQ Temp. Tolerance”.
In the situation when the CPU temperature detected is higher than the value of item “FanEQ
Target Temp.” plus the value of item “FanEQ Temp. Tolerance”, the speed ratio for the 3-pin
CPU fan assembly connected at “CPUFAN1” fan power connector will first run at the speed ratio
set by the item “FanEQ Start Control”, and then up to 100%.
Back to PC Health Status Setup Menu
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
Shutdown When FAN Fail
When set to [Enabled], the system will be shut down if the fan selected for monitoring is not
running.
CPU Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature exceeds
the settings value, system will force to shutdown to protect the processor not overheat.
CPU Warning Temperature
This item lets you select the temperature at which you want the system to send out a warning
message to the PC speakers of when the temperature goes beyond either limit. You can select
the temperatures you want.
All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment temperatures, fan
speeds, and system power voltage.