Abit Fatal1ty AN8 SLI Скачать руководство пользователя страница 33

Страница: 33 / 96

Hardware Setup

2-23

(16). AUDIOMAX Slot

The slot “

AUDIOMAX1

” provides the audio input/output connection at back panel through an audio

daughter-card.

NOTE:

Install this daughter-card at slot “

AUDIOMAX1

”.

•

SPDIF OUT:

This connector provides an S/PDIF-Out connection through optical fiber to digital

multimedia devices.

•

Line-in/IN:

This is a multi-functional connector.

This connector provides an S/PDIF-In

connection through optical fiber to digital multimedia devices. It also connects to the line out from
external audio sources.

•

Mic-in:

Connects to the plug from external microphone.

•

Line-out:

Connects to the front left and front right channel in the 7.1-channel or regular 2-channel

audio system.

•

Cen/Sub:

Connects to the center and subwoofer channel in the 7.1 channel audio system.

•

R.L./R.R. (Rear Left / Rear Right):

Connects to the rear left and rear right channel in the 7.1

channel audio system.

•

S.L./S.R. (Surround Left / Surround Right):

Connects to the surround left and surround

right channel in the 7.1 channel audio system.

User’s Manual

Содержание Fatal1ty AN8 SLI

































































































Результаты поиска

Содержание Fatal1ty AN8 SLI

Отзывы:

Похожие инструкции для Fatal1ty AN8 SLI

Бренды по названию

Популярные бренды

Abit Fatal1ty AN8 SLI, Руководство пользователя

Результаты поиска

Содержание Fatal1ty AN8 SLI

Отзывы:

Похожие инструкции для Fatal1ty AN8 SLI

Бренды по названию

Популярные бренды