Abit BG-71 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 96

background image

4-14 Chapter

4

Ultra DMA/33 or Ultra DMA/66/100 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (Windows

®

95 OSR2 / 98 /

ME / NT / 2000 or a third-party IDE bus master driver).

Auto:

If your hard drive and your system software both support Ultra DMA, select

Auto

to

enable BIOS support.

Disabled:

If you encounter a problem in using Ultra DMA devices, you can try to disable this

item.

Onboard IDE-2 Controller:

The description is same as the

Onboard IDE-1 Controller.

USB Controller:

Two options are available: Enabled and Disabled. The default setting is

Enabled

.

This

motherboard provides two Universal Serial Bus (USB) ports, thus supporting USB devices. If
you don't want to use USB devices, set it to

Disabled

, then the item

USB Keyboard Support &

USB Mouse Support

will also be disabled.

#

USB Keyboard Support:

Two options are available: OS and BIOS. The default setting is

OS

.

If you want to use USB

keyboard in DOS environment, please set it to BIOS.

#

USB Mouse Support:

Two options are available: OS and BIOS. The default setting is

OS

.

If you want to use USB

mouse in DOS environment, please set it to BIOS.

AC97 Audio

When set to

Auto

, it will allow the BIOS to detect the audio device you use. If an audio device

is detected, the onboard audio controller will be able to support it. If you want to use another
audio adapter card to connect the audio connectors, please set this item to

Disabled

.

Onboard LAN Controller:

This option enables or disables the LAN controller. The default setting is

Enabled

.

Onboard LAN Boot ROM:

This option enables or disables the Boot ROM on LAN controller. The default setting is

Enabled

.

Init Display First:

Two options are available: PCI Slot and Onboard/AGP. The default setting is

PCI Slot

.

When

you install an additional display card, you can choose either a PCI display card or an AGP
display card to activate the display boot-up screen.

BG-71

«
...
56
57
58
59
60
...
»

Содержание BG-71

































































































Отзывы:

Нет отзывов

Похожие инструкции для BG-71

Бренд: QDI Страницы: 69

Бренд: Xilinx Страницы: 14

Бренд: Intel Страницы: 76

Бренд: IBASE Technology Страницы: 93

Бренд: Micrel Страницы: 14

WAFER-CV-N26001

Бренд: IEI Technology Страницы: 135

PX845EV1 Series

Бренд: Albatron Страницы: 56

Бренд: MSI Страницы: 71

ISOFACE ISO2H823V2

Бренд: Infineon Страницы: 28

Бренд: ITX SECURITY Страницы: 18

DisplayPort VIP Input Board

Бренд: Lattice Страницы: 21

Бренд: ALi Confidential Страницы: 24

Бренд: Avalue Technology Страницы: 80

Бренд: WinSystems Страницы: 16

Бренд: Aaeon Страницы: 44

A320M gaming pro

Бренд: MSI Страницы: 20

Бренд: IEI Technology Страницы: 163

Бренд: ASROCK Страницы: 125

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды