Hardware Setup
2-7
(4). Front Panel Audio Connection Header
This header provides the connection to audio connector at front panel.
•
To use the audio connector at front panel, remove all the jumpers on this header, and then connect
to front panel by the extension cable provided with the chassis.
•
To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at
pin 5-6, and pin 9-10 (default setting).
Pin Pin
Assignment Pin Pin
Assignment
1 Audio
Mic.
2 Ground
3
Audio Mic. Bias
4
VCC
5
Speaker Out Right
Channel
6
Speaker Out Right
Channel Return
7 X
8 NC
9
Speaker Out Left
Channel
10
Speaker Out Left
Channel Return
11 Ground
12 S/PDIF
In
13 VCC
14 S/PDIF
Out
User’s Manual
Содержание BD7III
