Abit AX78, Руководство пользователя

Страница: 35 / 80

BIOS Setup
AX78 2-11
2.6 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-To-RAM) Item Help
- USB Resume from S3 Disabled
ACPI XSDT Table Disabled
Wake Up by PME# of PCI Disabled
Wake Up by Onboard LAN Disabled
Wake Up by Alarm Disabled
X - Day of Month Alarm 0
X - Time(hh:mm:ss) Alarm 0 : 0 : 0
Power On By PS/2 KB/MS Disabled
x - KB Power ON Password Enter
x - Hot Key Power ON Ctrl-F1
Restore On AC Power Loss Power Off
HPET Support Enabled
Power Button Function Instant-Off
‚€ :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type
This item selects the type of Suspend mode.
- USB Resume from S3
When set to [Enabled], this item allows you to use a USB device to wake up a system that is in
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].
ACPI XSDT Table
Leave this item at its default [Disabled] setting for 32-bit mode OS. Set to [Enabled] only for
64-bit mode OS.
Wake Up by PME# of PCI
When set to [Enabled], access through the add-on PCI card can remotely wake up the system
that was in Soft-Off condition. The PCI card must support the wake up function.
Wake Up by Onboard LAN
When set to [Enabled], access through the onboard LAN port can remotely wake up the system
that was in Soft-Off condition.
Wake Up by Alarm
When set to [ Enabled ], you can set the date and time you would like the Soft-Off PC to
power-on in the “ Date (of Month) Alarm ” and “ Time (hh:mm:ss) Alarm ” items. However,
if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to
the date and time set in these items, the system will give priority to the incoming calls or
network instead.
- Day of Month Alarm
[0]: This option power-on the system everyday according to the time set in the “Time
(hh:mm:ss) Alarm” item.
[1-31]: This option selects a date you would like the system to power-on. The system will
power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.