Abit AX5, Инструкция пользователя

Страница: 48 / 119

3-6 Chapter 3
Method 2: Try turning the system on a few times (3~4 times) and the
system will automatically use its standard parameters to boot.
You can then enter BIOS SETUP again and set up the new
parameters.
Method 3: Since you have to open the computer case when you change the
CPU, it could be a good idea to use the CCMOS jumper to
erase the parameters of the original CPU and to enter BIOS
Setup to set up CPU parameters again.
Note : The increase by 2.5% of the CPU speed is not a standard
feature of this product. It is only for use by our development
department to verify that the CPU is able to work normally
when CPU speed, operating temperature and power supply are
2.5% higher or lower than the standard values. This is to
guarantee product stability. We require the manufacturer of the
Clock Generator to meet the demands of our development
department and to add a TURBO Frequency feature used for
testing purposes by our R&D department. Of course, you can
use this feature to test the stability of your own system, but after
you have tested the product, we recommend that you set it back
to its normal value in order to guarantee system stability.
CPU Power Plane:
In the previous chapter we explained that the 586 CPUs can be divided into
two types: single voltage and dual voltage. This option will normally auto-detect
the type of your CPU, so you don
’
t need to make any changes.
ä
Single Voltage: Single voltage CPU
ä
Dual Voltage: Dual voltage CPU
¤
When the CPU is single voltage, the following options will be displayed
to set up the voltage:
/
Plane voltage:
ä
3.52v
¡G
For Intel VRE standard CPUs and AMK-K5 or Cyrix
8x86 CPUs
ä
3.38v
¡G
For Intel STD and VR standards CPUs