Abit AT6, Руководство пользователя

Страница: 19 / 82

Installing the Mainboard 2-
13
¯
Installation of the Pentium

II CPU
1.
Mount the two black plastic pegs noto the mainboard. These pegs will be
used to attach the fan heat sink supports. Notice that one hole and the
base of one peg are larger than the other hole and peg base. Push each
peg into its hole firmly to the end until you hear it “ click ” into place.
2.
Slide a black plastic support onto each end of the fan heat sink , making
sure that the hole and clip are on the outside edge of the support . Slide
each support toward the center of the processor until the support is
seafed in the outside groove in the fan housing .
Retention
mechanism
Large peg and hold
Top of processor
Groove in fan housing