Abit AN7 страница 51 Скачать руководство пользователя | Manualshive

Страница: 51 / 88

background image

BIOS Setup

3-9

Boot Up NumLock Status:

This item determines the default state of the numeric keypad at system booting up.

[On]:

The numeric keypad functions as number keys.

[Off]:

The numeric keypad functions as arrow keys.

Security Option:

This item determines when the system will prompt for password - every time the system boots or only
when enters the BIOS setup.

[Setup]:

The password is required only when accessing the BIOS Setup.

[System]:

The password is required each time the computer boots up.

NOTE:

Don’t forget your password. If you forget the password, you will have to open the computer case

and clear all information in the CMOS before you can start up the system. But by doing this, you will
have to reset all previously set options.

APIC Mode:

Leave this item to its default setting.

MPS Version Ctrl For OS:

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use. The
options are 1.1 and 1.4. The default setting is

1.4

. If you use an older OS for dual processor executing,

please set this option to 1.1.

OS Select For DRAM > 64MB:

This item allows you to access the memory that is over 64MB in OS/2. Leave this item to its default
[Non-OS2] setting for operating system other than OS/2.

Report No FDD For OS:

When set to [Enabled], this item allows you to run some older operating system without floppy disk drive.
Leave this item to its default setting.

Delay IDE Initial:

This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A
larger value will give more delay time to the device for which to initialize and to prepare for activation.

User’s Manual

«
...
49
50
51
52
53
...
»

Содержание AN7

























































































Отзывы:

Нет отзывов

Похожие инструкции для AN7

Бренд: M5Stack Страницы: 16

Бренд: LITETRONICS Страницы: 2

Бренд: Gigabyte Страницы: 51

Бренд: ST Страницы: 15

Бренд: ASROCK Страницы: 83

Бренд: IBASE Technology Страницы: 60

Бренд: AMD Geode Страницы: 51

tps61040EVM-002

Бренд: Texas Instruments Страницы: 31

Бренд: Analog Devices Страницы: 6

Бренд: Digilent Страницы: 17

GA-Z97X-Gaming G1

Бренд: Gigabyte Страницы: 136

Бренд: Gigabyte Страницы: 96

Бренд: Supermicro Страницы: 84

Бренд: Avalue Technology Страницы: 80

Бренд: Gigabyte Страницы: 39

Бренд: MSI Страницы: 445

Бренд: JETWAY Страницы: 51

PHANTOM GAMING B650E PG-ITX WiFi

Бренд: ASROCK Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды