Abit AA8XE Скачать руководство пользователя

Страница: 47 / 80

BIOS Setup

3-19

Onboard FDD Controller:

This option enables or disables the onboard FDC controller.

Onboard Serial Port 1:

This item determines which I/O addresses the onboard Serial Port controller will access.

[Auto]:

The system automatically select an I/O address for the onboard Serial Port.

[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]:

Allows you to manually select an I/O address for the

onboard Serial Port.

[Disabled]:

Disables the onboard Serial Port.

Onboard Parallel Port:

This item specifies the I/O address used by the parallel port.

[Disabled]:

This option prevents the parallel port from accessing any system resources. When the value

of this option is set to [Disabled], the printer port becomes unavailable.

[378/IRQ7]:

This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority

of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.

[278/IRQ5]:

This option allows the parallel port to use [278

IRQ5] as its I/O port address.

[3BC/IRQ7]:

This option allows the parallel port to use [3BC

IRQ7] as its I/O port address.

Parallel Port Mode:

This item specifies the parallel port mode.

[Normal]:

Allows the standard parallel port mode to be used.

[SPP]:

(Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.

[EPP]:

(Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.

[ECP]

: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than

the normal mode’s data transfer rate.

[ECP+EPP]:

Allows parallel port operation at ECP and EPP mode.

EPP Mode Select:

This item selects the EPP mode.

ECP Mode Use DMA:

This item selects the DMA channel of the parallel port.

User’s Manual

Содержание AA8XE

















































































Результаты поиска

Содержание AA8XE

Отзывы:

Похожие инструкции для AA8XE

Бренды по названию

Популярные бренды

Abit AA8XE, Руководство пользователя

Результаты поиска

Содержание AA8XE

Отзывы:

Похожие инструкции для AA8XE

Бренды по названию

Популярные бренды