Abit AA8XE Скачать руководство пользователя

Страница: 41 / 80

BIOS Setup

3-13

[Off]:

The numeric keypad functions as arrow keys.

Security Option:

This item determines when the system will prompt for password - every time the system boots or only
when enters the BIOS setup.

[Setup]:

The password is required only when accessing the BIOS Setup.

[System]:

The password is required each time the computer boots up.

NOTE:

Don’t forget your password. If you forget the password, you will have to open the computer case

and clear all information in the CMOS before you can start up the system. But by doing this, you will
have to reset all previously set options.

MPS Version Ctrl For OS:

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use.
Leave this item to its default setting.

Report No FDD For OS:

When set to [Yes], this item allows you to run some older operating system without floppy disk drive.
Leave this item to its default setting.

Delay IDE Initial (Secs):

This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A
larger value will give more delay time to the device for which to initialize and to prepare for activation.

Disable Unused PCI Clock:

This option disables the clock of PCI slot that is not in use.

[Yes]:

The system automatically detect the unused DIMM and PCI slots, and stop sending clock signal to

these unused PCI slots.

[No]:

The system always send clock signal to all PCI slots.

NOTE:

Set this option to [No] setting if there are adapters that cannot be automatically detected by the

system and will cause malfunction.

Full Screen LOGO Show:

This item determines to show the full screen logo when booting.

User’s Manual

Содержание AA8XE

















































































Результаты поиска

Содержание AA8XE

Отзывы:

Похожие инструкции для AA8XE

Бренды по названию

Популярные бренды

Abit AA8XE, Руководство пользователя

Результаты поиска

Содержание AA8XE

Отзывы:

Похожие инструкции для AA8XE

Бренды по названию

Популярные бренды