Abilica Bike 20, Руководство пользователя

Страница: 36 / 40

36
Program Operation
Manual(P1)
4. Selecting “ Manual ” using UP OR DOWN KEY then pressing ENTER KEY.
5. 1St parameter “Time” will flash so value can be adjusted using UP OR DOWN KEY. Press
ENTER KEY to save value & move to next parameter to be adjusted.
6. Continue through all desired parameters, pressing START/STOP to start workout.
Note: One of workout parameters counts down to be zero, it will have bi sounds and
stop the workout automatically. Press START KEY to continue the workout to reach the
unfinished workout parameter.
Pre-programs (P2-P9)
There are 8 program profiles ready for use. All program profiles have 24 level of resistance.
Setting Parameters for Pre-programs
1. 1. Selecting one of pre-programs using UP OR DOWN KEY then pressing ENTER KEY.
2. 1St parameter “Time” will flash so value can b e adjusted using UP OR DOWN KEY. Press
ENTER KEY to save value & move to next parameter to be adjusted.
3. Continue through all desired parameters, pressing START/STOP to start workout.
Note: One of workout parameters counts down to be zero, it will have bi sounds and
stop the workout automatically. Press START KEY to continue the workout to reach the
unfinished workout parameter.
Watt control program(P10)
1. Selecting “ Watt control program ” using UP OR DOWN KEY then pressing ENTER KEY.
2. 1St parameter “Time” will flash so value can be adjusted using UP OR DOWN KEY. Press
ENTER KEY to save value & move to next parameter to be adjusted.
3. Continue through all desired parameters, pressing START/STOP to start workout.
Note: One of workout parameters counts down to be zero, it will have bi sounds and stop the
workout automatically. Press START KEY to continue the workout to reach the unfinished
workout parameter.
Computer will adjust the resistance load automatically depends on the speed to maintain
the constant watt value. User can use up down key to adjust the watt value during
workout.