Abilia Progress PC, Руководство пользователя, Страница: 19 / 45

19
Recording IR Codes
When the best position has been determined as
described above, press the
Back button. Now you can
choose between two different recording methods
“Standard” and “Alternative”. Always start with the
standard method.
Press and hold down the button of the remote control
unit that is to be recorded, and follow the instructions
on the screen. Two presses are normally required, and
sometimes more than two, in order to record an IR
code.
Alternative Method
Codes can be recorded from most remote control units on the market, but there
are a few exceptions. It may be a case of a single button or all the buttons on a
unit. Select recording by the “Alternative method” if recording by the standard
method does not work.
Rapid Recording
If many IR codes are to be recorded, a shortcut can be used to speed up the
recording process. It is not possible to choose recording method in this case:
the standard method has been pre-selected. It is also possible to test the
recording distance, but the indicator lamp (green) is located in the lower right
corner.
Record codes by the rapid process by the following procedure:
Settings  Pages/buttons  Select page  browse among the pages 
Select this page  Record IR  Select the button that is to be programmed  Follow
the instructions on the screen  Done  Record IR  etc.
Most distant position
Progress
Left Right