Abilia 429200-1, Руководство пользователя

Страница: 39 / 60

39
2.8 Adding a 4096 code
Control Medi is delivered with a special coded channel (4096) on the Code -button
!
. The
code is selected randomly. This coded channel is normally used for functions that require
strict authorization such as apartment or house doors. The code has 4096 different
combinations.
The Code -button always has the same code irrespective of which level you use. If you have
to program a new coded channel there are two methods of doing so. You can set the 4096
code on any level and button. It is recommended to keep the 4096 code on the
Code-
button .
NOTE! When you add a new coded channel it is added to just one level. If you want to use
the Code-button with the same code on several levels, you must add it to each level.
Method one: record the code from another transmitter, as described under Recording IR
channels from another Transmitter .
For method two a binary code is entered. Make up the binary code yourself or else use a
code that is already set in an IR receiver or IR transmitter.
There are two types of IR receivers: an older type of receiver where you set the code with a
12-pole switch, or a newer type where the IR receiver is programmable. The principle is the
same when it comes to creating the binary code.
Fig 3 shows a 12-pole switch. Switches 1,
4, 6 and 12 are in the “On” position, the others are in the “Off” position.
1 2 3 4 5 6 7 8 9 10 11 12
2048 1024 512 256 128 64 32 16 8 4 2 1
On
Off
Fig 3
The following example describes how the binary code is created according to method two:
1. First press and then simultaneously press
1
for 2 seconds. When you release the
buttons the
“Setting” alert sounds and the indication lamp on button 1 flashes.
2. Press
2
and then press
2
again.
3. Select the level where the 4096 code is to be set with .
4. Select the button where the 4096 code should be saved. (Button
!
is recommended.)
5. Enter the code by pressing on
1
or
2
.
1
= switch in Off position and
2
= switch in On position.
Press twelve times in turn;
2
,
1
,
1
,
2
,
1
,
2
,
1
,
1
,
1
,
1
,
1
,
2
, ( Fig 3 ).
6. If the action is successful, the
“Success” alert sounds. If something goes wrong or takes
too long, the
“Error” alert sounds.
7. The code is now set on your selected button. NOTE! The code above is just an example
and should be different for different users. Make a note of the chosen code for future
usage.
NOTE! If you have added a coded channel to the Code-button and you want to use the
Code-button with the same code on several levels, you must add it to each level
individually.
Adding a 4096 code
Press
---
+
1
2 sec
,
2
,
2
, choose the level with
---
, choose the button
X
, then press
1
or
2
12 times.
1
= Off position.
2
= On position.
Default setting: Random code
---
---