Abicor Binzel xFUME POWER 250, Оригинальная инструкция по эксплуатации

Страница: 63 / 72

xFUME POWER 250 9 Maintenance and cleaning
EN - 27

Fig. 2 Control elements on page EN - 12
1
Switch the main switch ON/OFF (C) to OFF and disconnect the power supply from the xFUME
®
POWER
250.

Fig. 7 Replacing the filter on page EN - 27
2
Loosen the quick release fastener (G) and open the cover of the extraction device (A) .
3
Pull the dust collecting bag over the filter, remove the filter, seal the dust collecting bag and dispose
of in accordance with local regulations.
4
Remove all dust from the extraction device.
5
Insert the new filter. Observe the mounting direction (C) in (F) , (D) in (E) .
6
Close the cover (A) and secure it with the quick release fastener (G) .
9.3 Cleaning outer surfaces
1
Clean outer surfaces with a suitable industrial vacuum cleaner (dust class H according
to DIN EN 60335-2-69 Appendix AA) or a damp cloth.
2
Dispose of cleaning residues/cloths in accordance with local regulations.
Fig. 7 Replacing the filter
A Extraction device cover
B Filter
C Extraction OUT
D Extraction IN
E Filter IN
F Filter OUT
G Quick release fastener
A
G
B
C
D
E
F