EN
-
10
4 Product description
xFUME
®
ADVANCED
4.2 Control elements and connections
4.3 Technical data
* 1 extraction hose connection length 5 m connected, second connection closed.
► Obtain the volume flow to be provided at the connector to achieve the actual induced speed according
to DIN EN ISO 21904 V
i
from the operating instructions of the corresponding fume extraction torch.
Fig. 3
Control elements/ports
A
On/Off switch
B
Auto/Manual switch
C
Fuse
D
Power LED
E
Service LED
F
Current clamp port
G
Output regulator
H
Hour meter
I
Mains connecting cable
Auto/Manual switch (B)
The automatic starting function is activated when the switch is set to
Auto. If the switch is set to Manual, the automatic starting function is
inactive and the device must be switched on and off manually.
Power LED (green) (D)
The power LED illuminates green continuously when the motor is
running. During initialization, the power LED and the service LED flash
alternately.
Service LED (orange) (E)
The device is equipped with a safety device to monitor the minimum air
volume flow to be extracted. A differential pressure switch is used for
monitoring purposes. The service LED illuminates in orange continuously
when both filter cartridges are not functioning properly or are saturated
and must be replaced. During initialization, the service LED and the
power LED flash alternately.
G
I
H
F
E
D
C
B
A
Tab. 1
General information
Connection voltage
115 V
230 V
Rated frequency
50 Hz/60 Hz
Drive power
2 × 0.8 kW
Filter surface
2 × 0.8 m²
Connection diameter
60 mm
Max. air volume flow*
260 m³/h
Sound pressure level LpA
< 72 dB (A)
Max. inlet air pressure
5–6 bar
Fuse on mains side
16 A
Weight
40 kg
Dimensions (L × W × H)
370 mm × 370 mm × 900 mm
From June 2021