EN - 5
MAG Welding torches
4 Putting into operation
3.2 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Power, Gas
Further measures can be found in the "Power supply" user manual or in the
documentation of further peripheral devices.
4 Putting into operation
4.1 Equipping the torch
NOTE
Describes the risk of impairing work results or the risk that may result in
material damage to the equipment.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply.
• Cut off the gas supply.
• Pull the mains plug.
NOTE
• The MAG welding torches may only be put into operation by trained
personnel.
CAUTION
Risk of injury
Through-hole or puncture caused by electrode tip.
• Do not reach into the danger zone.
• Wear protective gloves.
1
Gas nozzle
2
Contact tip
3
Tip adaptor
4
Gas diffuser
5
Torch neck
Fig. 1
Type 61GD/610D
1
2
3
4
5
