EN - 8
6 Putting into operation
MF Control
6 Putting into operation
6.1 Connecting the MF Control
The MF Control must only be used in conjunction with the eBOX MFS-V3 master feeder system.
Carry out each step in accordance with the figure below:
NOTICE
• Please take note of the following instructions:
5.2 Control elements on page EN-7
• The system must only be put into operation by qualified personnel (in Germany, see TRBS 1203).
Pin assignment for
M12 plug
Assignment (Ethernet, power supply), 8-pin, A-coded,
view from side of pin
1
RX+
2
RX−
3
TX+
4
24 VDC+
5
24 VDC+
6
TX−
7
24 VDC−
8
24 VDC−
Fig. 3
Connecting the MF Control
A
B