Abicor Binzel FreedomDrive Abimig AT355, Руководство по эксплуатации

Страница: 17 / 24

17
FreedomDrive
5.3 Wire Feed Speed Knob in MIG gun Handle
5.4 FreedomDrive Wire Feed Speed Range Selector Switch
Fig. 13 Wire Feed Speed Knob in MIG gun Handle
1. Rotate the wire feed speed knob in the direction of the ( - ) indicator (couter-
clockwise) to reduce wire feed speed. Rotate the knob in the direction of the
( + ) indicator (clockwise) to increase speed.
Note: The handle mounted wire feed speed knob functions in conjuction with the range
selector switch, see section 5.4.
Fig. 14 FreedomDrive Wire Feed Speed Range Selector Switch
1. The wire feed speed range selector switch is only available on MIG guns
with handle mounted wire feed speed knobs. The range selector on the
FreedomDrive is necessary to allow fine adjustments to wire feed speed.
2. Turn the knob in the direction of the ( - ) arrow to decrease the wire feed
speed range. Turn the knob in the direction of the ( + ) arrow to increase the
wire feed speed range. There are three ranges available as indicated by the
dashed lines on the knob. The number of dashed lines centered in the knob
opening indicate the selected range setting.
1 Dash = Lowest WFS range
2 Dashes = Medium WFS range
3 Dashes = Highest WFS range
(option based on MIG gun selection - see ordering chart)
(option based on MIG gun selection - see ordering chart)
Wire Feed Speed Range Selector Switch
Wire Feed Speed Knob
+
--