Abicor Binzel FES-200, Инструкция по эксплуатации

Страница: 37 / 100

FES-200 5 Functional description
BAL.0209.0 • 2019-08-06
EN - 13
5.1 Dedusting the filter
Connect the compressed air (1) . Set the pressure relief valve to 5 bar and open the valve lever (2) on the compressed air
connection. Depending on the pressure, the compressed air produces a dedusting jet and causes the dedusting nozzle to
rotate inside the fine filter cartridge. The filter is cleaned by manually moving the dedusting system up and down. Empty the
separated dust from the dust collecting drawer
(7) into the dust collecting bag supplied.

Fig. 2 Functional Description on page EN-10
Reinstall the dust collecting drawer (7) and close it.

Fig. 2 Functional Description on page EN-12
1 Compressed air connection for dedusting with the
pressure relief valve
2 Valve lever
3 Dedusting system 4 Filter cartridge
Fig. 3 Dedusting the fine filter cartridge
CAUTION
• Check and wear your personal protective equipment.
• The personal protective equipment consists of protective clothing, safety goggles, respirator mask class P3, protective
gloves and safety shoes.
• Nobody without personal protective equipment may stay near the dust collecting drawer when filling the separated
dust into it.
NOTICE
• Use only dry and oil-free compressed air (approx. 5 - 6 bar).
• If the input pressure is > 5 bar, the excess pressure escapes sidewise through the pressure relief valve
(1) .
NOTICE
• The dust collecting drawer (7) must be emptied after every third cleaning of the filter.
1
2
3
4