Abicor Binzel AUTC 61GD, Руководство по эксплуатации

Страница: 26 / 68

EN - 10
6 Putting into operation MAG
6.3 Mounting the machine side cable assembly
1 Combine central connector (3) and central socket (8) at the wire feed unit
(6) and secure them with the connecting nut (2) .
6.4 Connecting the cooling system
1 Cable assembly
2 Connection nut
3 Central connector
4 Wire basket spool
5 Shielding gas cylinder
6 Power supply
7 Wire feed unit
8 Central socket
Fig. 3 Mounting the cable assembly on the machine side
1 2 3 4
5
6 7 8
NOTE
• Check once again whether the wire guide liner has been fastened
correctly.
WARNING
Risk of burns
MAG will become overheated if the coolant level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTE
• Applies only to liquid-cooled MAG welding torches.
• Make sure that the coolant supply and return have been installed
properly. Coolant supply = blue, Coolant return = red.
• Make sure that liquid-cooled MAG welding torches are only operated
with the ABICOR BINZEL coolant BTC-15.