Abicor Binzel ADF 600S, Руководство по эксплуатации

Страница: 37 / 132

ADF 600S 11 Disassembly
EN - 19
11 Disassembly
Disassemble the ADF 600S as follows:

9.2 Replacing the automatic filter on page EN-17
12 Disposal
When disposing of the system, local regulations, laws, provisions, standards and guidelines must be
observed. To correctly dispose of the product, it must first be disassembled.

11 Disassembly on page EN-19
12.1 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
The welding
helmet slips. • The head band was not adjusted evenly. • Adjust the head band precisely and ensure equal
distance of the eyes to the filter lens.

6.2 Adjusting head band on page EN-10

6.3 Adjusting head circumference on page EN-10
Fault Cause Troubleshooting
Tab. 11 Troubleshooting
NOTICE
• Disassembly must only be carried out by qualified personnel (in Germany, see TRBS 1203).
• Observe the information provided in the following section:

8 Putting out of operation on page EN-15