BAL.0092 • 2017-06-06
EN - 3
ABIPLAS
®
WELD
1 Identification
1 Identification
The ABIPLAS
®
WELD plasma welding torches are used in industry and the
trade sector for inert gas welding using inert gases and gas mixtures containing
active gases. This range can be used for joint welding in all welding positions.
The welding torches are liquid cooled. Their operation requires a power source
with an integrated coolant recirculator or a separate coolant recirculator.
These operating instructions only describe the ABIPLAS
®
WELD plasma
welding torches. The welding torch system must only be operated with original
ABICOR BINZEL
spare parts.
1.1 CE marking
This device fulfils the requirements of the valid EU directives.
2 Safety
The attached safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
2.2 Personal protective equipment (PPE)
To avoid danger to the user, these instructions recommend the use of personal
protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory
mask, protective gloves and safety shoes.
The conformity is confirmed by the CE marking on the
device.