EN - 6
BAL.0173 • 2018-09-28
3 Product description
ABICUT 25K/45/75
Standard values for cutting capacity
The specifications on the cutting capacity are standard values only as they are also greatly
affected by the following factors: type and quality of the material; pressure of and impurities in
the compressed air; temperature of the workpiece to be cut; desired cut quality; condition of the
electrodes and cutting nozzle; distance and position of the cutting torch relative to the
workpiece; power source characteristics; cutting speed.
ABICUT 25K
ABICUT 45
ABICUT 75
Standard nozzle
0.65 mm / to 20 A
0.65 mm / to 25 A
1.0 mm / to 55 A
Standard nozzle
0.8 mm / to 20 A
0.8 mm / to 40 A
1.2 mm / to 75 A
Long nozzle
0.9 mm / to 20 A
0.9 mm / to 40 A
1.0 mm / to 50 A
Long nozzle
1.2 mm / to 70 A
Tab. 3
Selection of plasma nozzle
Material thickness
ABICUT 25K
ABICUT 45
ABICUT 75
Steel
6 mm at 20 A
10 mm at 40 A
20 mm at 75 A
Stainless steel
6 mm at 20 A
10 mm at 40 A
18 mm at 75 A
Aluminium
4 mm at 20 A
6 mm at 40 A
15 mm at 75 A
Tab. 4
Standard values for cutting capacity
ABICUT 25K
ABICUT 45
ABICUT 75
Standard length
(other lengths available on request)
4 m
6 m
6 m
Structure
Cable assembly
Cable assembly
Cable assembly/
coaxial cable
Power/air cable connection
G1/4
Version
Direct or central connector
Tab. 5
Cable assembly
NOTICE
• An
ABICUT 75
with a coaxial cable must not be operated using HF ignition. Doing so
may cause problems with the torch, coaxial cable and power source.