background image

3

877.788.7253  •  ABIsupport.com

ABI® Workman Trailer Manual

Improper tire pressure can result in blowout and loss of control, which can lead to death or serious injury. 

 

Be sure tires are inflated to pressure indicated on sidewall before towing trailer. 

An improperly coupled trailer can result in death or serious injury.

  Do NOT tow the trailer until: 

 

The coupler is secured and locked to the hitch, use 2” ball hitch only;

 

The coupler is adjusted properly to fit the towing vehicle 2” ball;

 

Tires and wheels are checked;

 

The load is secured to the trailer; and

 

The trailer lights are connected and checked

Lug nuts are prone to loosen after initial installation, and if improperly tightened can lead to death or 

serious injury. 

 

Check lug nuts for tightness on a new trailer or when wheel(s) have been remounted after the 

first 10, 25 and 50 miles of use. Tighten lug nuts before each use.

An overloaded trailer or improper distribution of load weight or shifting cargo can result in loss of con-

trol of the trailer, leading to death or serious injury. 

 

Do not exceed the trailer Gross Vehicle Weight Rating (800 lbs. GVWR)

 

Tie down all loads with proper sized fasteners, ropes, straps, etc. (Not included)

 

Never disconnect trailer from tow vehicle while loaded.

 

Distribute the load front-to-rear and provide proper tongue weight.;

 

Distribute load evenly, right to left, and avoid tire overload; and

 

Keep the center of gravity low.

WaRNING

WaRNING

WaRNING

WaRNING

Improper electrical connection between the tow vehicle and the trailer will result in inoperable lights  

and can lead to collision. Before each use:

 

Check tail/brake light for proper functioning

WaRNING

Stay clear of dump trailer when in use. 

Pinch points and material being dumped out of the trailer may 

result in death or serious injury.

 

Never operate the dump system, up or down, without first visually and audibly ensuring peo-

ple, animals and other objects are clear of the trailer and the contents it is dumping.

 

Tailgate may be under pressure or helping to secure the contents of trailer bed, use caution 

when opening and keep feet clear.

 

The trailer bed is under pressure. When pulling the bed latch pin, the bed will automatically 

rise. Use dump arm to control, stand to one side of the arm and do not stand over the arm.

WaRNING

Содержание Workman













Отзывы: