The sprayers are able to spray between 8’ --21’ by setup. You
can adjust these by turning the brass heads to cover more
area. The 2 outside sprayers can both be shut off to control
how much of an area is covered. This also gives you even more
control over how much water is applied.
This is where the optional hose will connect. In order for the
hose to work properly you need to shut off the ratcheting top
valve (covered above). Shut off the ratcheting valve, open the
tank valve and crack the return valve when using the optional
hose.
This optional feature allows you to fill the tank using a pond,
river, creek, etc. to operate this attachment you will need to
shut off the sprayers, using the ratcheting valve, and open
the pond fill valve shown in the picture. Close the tank valve,
and you will open the return valve fully. Make sure the pump
has been primed and either remove the top fill lid or open it
slightly to allow water to fill the tank. You will also need to
secure the fill head into a small bucket to help prevent sucking
up debris into the hose and tank.
Call Toll Free:
877-788-7253
Email:
11
SETUP INSTRUCTIONS (cont'd)
Sprayer Boom:
Hose Connector:
Pond Fill system:
