ABGENE ALPS 50V, Руководство пользователя

Страница: 3 / 16

WARNING: If the unit is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
• The unit is intended for indoor laboratory use only, at an altitude of less than 2200m
above sea level, within a temperature range of 18°C to 30°C and a relative humidity
range of 20% to 80% non-condensing. If the instrument is stored outside these ranges,
it should be left to stand until it equilibrates to within the above limits.
• Ensure the voltage selection switch is set to the correct voltage for the required region
(See Fig 3).
• Ensure the correct fuse for the required voltage setting is fitted (see Specifications
section).
• Do not operate the unit outside the rated power supply range specified.
• There are no user accessible or serviceable parts inside the unit. Do not remove or open
the unit’s casework.
• Before using any cleaning or decontamination method except those recommended by
the manufacturer, users should check with the manufacturer that the proposed method
will not damage the equipment.
• Ensure the unit is only connected to an earthed supply.
WARNING: The hot plate can reach temperatures up to 200°C. Care must be taken
not to touch it or serious burns may occur.
• The unit will remain hot for a considerable time after it has been turned off and must
be allowed to cool down to an acceptable level before cleaning.
• Foil sealed plates may remain hot for a number of seconds after sealing and should be
handled with care.
Warnings >>
2
!!