abc ABC-MEMS, Руководство пользователя, Страница: 36 / 43

User’s Manual 35
8.7.2 WiFi
Settings
The WiFi™ settings panel appears when the Set WiFi button is pressed. The WiFi™ settings are used
to configure the Router(s) or Access Point(s) to connect to, the Server’s IP address or domain name,
and the periodic connection schedule.
Note: The Router and Access Point connection parameters must be set in order to send emails,
even if no WiFi™ reporting is active or required.
Figure 18 WiFi Settings
8.7.2.1 Schedule
Whether it is recording or idle, the instrument can activate its WiFi™ interface and try to connect to a
server at regular intervals. The connection schedule is defined in that field. In order to enable that
behavior, the following must be setup:
•
The Connect Interval must be set: The interval is often chosen as
once per hour, or once per 10 min. Setting too short an interval (lower than 5 min) will drain the
battery faster. Setting too long an interval (several days, a week or more) will risk losing data if
the connection cannot be established at its scheduled time. The interval must not be set to 0.
We do not advise setting a schedule interval lower than 2 min.
•
The WiFi-Report-Active button must be pressed: When the button is released the
instrument will not try to connect at the set interval.
•
A start date and time must be set sometime in the future: The periodic connection attempts
will only begin at the set date and time.
8.7.2.2 Access Point
The coordinates of the access point or WiFi™ router can be set, with its security method, password,
and priority. A router or access point is defined by its SSID .
When security is used, a password must be set and the proper security method in effect for that router
must be set (WEP, WPA or WPA2). The security is often WPA or WPA2 nowadays because it offers
improved security.