GB 24
Press the PLAY/PAUSE button (
),
“
BUSY
”
briefly appears on the display, and the recording is
paused. To restart recording, press the PLAY/PAUSE button (
).
You cannot restart recording while
“
BUSY
”
is displayed. Remember that every time recording is paused
or stopped, a new track number will always be assigned. It is not possible to record in two
“
stages
”
within
one track.
c) Manual track division
It is possible to device the recording into tracks while recording. While recording is taking place, press
the TRACK INCREMENT button, the current track number will be incremented by one.
The TRACK INCREMENT button works regardless of the MANUAL/AUTO REC setting. This section
deals with the actions taken after recording.
Once finalized, CD-R disc are truly final. No more tracks can be recorded on them. By contrast, CD-RW
disc can be un-finalized, and if there is space, further material can be recorded on them.
Erase or unfinalize a CD-RW
It is possible to erase the last recorded track, it is also possible to erase a whole disc.
Erase procedures are possible only on an unfinalized CD-RW disc. If a CD-RW disc has been finalized,
unfinalize it prior to erasure. Remember that it is not possible to perform any erase or unfinalize
procedure on a CD-R disc.
1. Press the CD button to select
“
CD
”
.
2. Load s record CD-RW.
3. Press the ERASE button in the stop mode.
(1). Wait until
“
BUSY
”
disappear on the display.
(2). Press the (
) button to begin erase the last track.
(3). Repeat to press Erase button to continue the next track.
“
Er
”
and the last track number appear when the disc
hasn’t
been finalized. Each time the ERASE button
is pressed the display changes as follows:
