2
This document is a guide. For complete details, always refer to the NT2000iX
™
RF Generator Operator’s Manual.
POWERING ON
1. Insert the power cord into the power cord connector
on the generator’s rear panel.
2. Plug the other end of the power cord into a hospital-
grade AC outlet.
3. Flip the power switch located on the rear panel to
turn the generator on.
4. The system will run a self-test and then display the
Welcome screen shown above.
NOTE:
In this guide, we use green boxes to indicate where you will tap the touchscreen to complete the
steps. They do not appear on the display screen itself.