2
14
2 GETTING STARTED
Note:
Make sure to remove all storage devices before you switch on the
m-PIMA™ Analyser.
• Then press the grey Power On button located on the front of the
m-PIMA™ Analyser.
The EP-mode of the internal battery is now deactivated.
An automated initialization procedure
commences and may last for approximately
one minute. The screen changes automatically
during this procedure.
Please refer to section 8 to learn more about
shutting down the m-PIMA™ Analyser and
re-activation of the EP-mode. If the
m-PIMA™ Analyser fails to correctly initialize,
an Error Code or an Error Message will
be displayed.
Please refer to section 9 to learn more about
Error Codes and respective actions.
The m-PIMA™ Analyser is ready for use when
the «HOME» screen is displayed.
Charging the m-PIMA™ Analyser
Your m-PIMA™ Analyser is supplied with a partly charged battery secured
within the instrument to cover power outages. Once the m-PIMA™ Analyser
is set up and the battery EP-mode is deactivated the battery will be
automatically charged while the instrument is running and connected to an
external power supply.
Ensure the battery is fully charged before you initiate a test run.
Please refer to section 7 for more information about the battery status.
POWER OFF
HOME
2019-11-07
14:51
ARCHIVE
SETTINGS
DEVICE
RUN TEST
Содержание m-PIMA
Страница 1: ...m PIMA ANALYSER USER GUIDE EN ...
Страница 71: ...71 10 m PIMA ANALYSER USER GUIDE ...