'-�
4.
Apply control solution to the test strip.
Shake the control solution bottle to mix the solution.
Apply a drop of control solution to the white area at
the end of the test strip in the area shown. The control
solution is drawn into the test strip.
5.
Hold the control solution to the test strip until:
•
You see 3 short lines on the meter screen. This
means you have applied enough control solution
and the meter is reading the control solution.
Notes:
•
If you are testing with a blood glucose strip, you
will see a 5-second countdown. If you are testing
with a blood ketone strip, you will see a 7 0-second
countdown.
•
Do
not
remove the test strip from the meter during
the countdown.
•
If the countdown does not start, remove and
discard the used test strip, turn off the meter and
try again with a new strip.