0
Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
EN
G
LI
SH
1
EN
G
LI
SH
Unit of Measurement
The Unit of Measure for your Freestyle Flash
Meter is milligrams per deciliter (mg/dL).
Software Version Display
This is the software version in your FreeStyle Flash
Meter. It is for display only and cannot be changed.
The picture to the left is an example. Your meter
may have a different number.
You have completed Meter Set-Up.
• To move to “Setting the User Alarms” press the “
m
” button.
• To exit press and hold the “
m
” button.
Meter Results
Meter Memory
• To Enter
Start with the meter in clock mode (no test strip inserted). Press the
“
m
” button and release; the first memory screen to appear will be
your 14-day average.
• To Exit
Press the “
m
” button until the meter returns to clock mode, then
release.
1-Day Average
The first memory display screen you see is your 14-day average. This
includes all the readings from the last 14 days starting from the cur-
rent date and time shown on the meter. (Control solution, LO, and HI
readings are not included in the average.)
Test Results
The meter stores the last 250 test readings with time and date. You
may scroll through all of the readings by pressing and holding the “
c
”
button. The first reading you see is the most recent result.
Temperature:
A result with a thermometer symbol indicates that
the reading was taken outside of the meter’s specified operating
temperature range and may not be accurate. This value is included in
your 14-day average.
LO Reading:
A LO reading (under 20 mg/dL) is included in the
memory as LO.
HI Reading:
A HI reading (over 500 mg/dL) is included in the
memory as HI.
Blood Glucose Test
A result without a control solution symbol ( )
indicates that it is a blood glucose reading. The
date and time of the test will appear on the bottom
of the screen.
14d avg = your 14-day average
n = indicates the number of results
included in your 14-day average
