Abbott Eterna 32400, Руководство для клиницистов

Страница: 20 / 28

interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
▪
Reorient or relocate the receiving antenna.
▪
▪
Increase the separation between the equipment and receiver.
▪
▪
Connect the equipment into an outlet on a circuit different from that to which the receiver is ▪
connected.
▪ Consult the dealer or an experienced radio/TV technician for help. ▪
Operation is subject to the following two conditions:
▪
This device may not cause harmful interference.
▪
▪
This device must accept any interference received, including interference that may cause undesired
▪
operation.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment under FCC rules.
Identification Information for Product Registration
This device has a label that contains, among other information, a product identifier in the following format:
Table 6. Registration identification information
Identifier Type Registration Identifier
FCC registration number PX2-GMIPG1
Wireless Technology Information
The following table summarizes the technical details of the Bluetooth® Low Energy as it is implemented in
the device.
Table 7. Bluetooth® Low Energy information
Antenna type Modified monopole
Antenna dimensions 10.7 mm x 4.3 mm x 3.0 mm
Modulation GFSK
Output power (EIRP*) 2 mW (+3 dBm) typical
Duty cycle 14.1% or less over 6 min period
Range Up to 2 m typical
Center frequency 2.44 GHz
Channel frequency range 2.402 GHz to 2.480 GHz
Channel 40 logical channels using AFH
Bandwidth per channel 2 MHz
Data flow Bi-directional
Protocol Bluetooth® Low Energy
Semi-duplex capability Yes
*EIRP = Equivalent isotropically radiated power (not duty cycle adjusted)
16