manualshive.com logo in svg

Abbott Diagnostics Aeroset, Руководство по обучению клиентов

Поделиться
Скачать
Abbott Diagnostics Aeroset Скачать руководство пользователя страница 178

MODULE 5: RESULT HANDLING

5-18

 

AEROSET

®

 Customer Training Guide

94858-103 — July 2003

THE LIMITED RUN FEATURE

The Limited Run feature allows the Operator to exclude assays 
scheduled for a patient sample without changing the order. The 
AEROSET System aspirates all scheduled assays except the excluded 
assays. Orders remain pending and no errors are generated. This feature 
may be used when:

• The reagent for an assay is not onboard

• The sample requires pretreatment before the assay can be performed 

(TIBC, etc.)

Limiting Assays in a Run

WARNING: Potential Biohazard.  

Refer to

 Appendix, 

Hazards

 of this manual.

1. Order and load the patient samples. 

2. Select 

<RUN>

 in the Action Area. The

 RUN OPTIONS 

screen is 

displayed.

Figure 5.10: RUN OPTIONS Screen

3. Place a checkmark (

;

)

 

in the box to the left of the Patient option by 

touching the box.

4. Place a checkmark (

;

)

 in the box to the left of the Limited option 

by touching the box.

Содержание Aeroset









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды