Abbott & Ashby Linisher Installation Manual
7
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power
tool, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended
could result in a hazardous situation.
h.
Qualified User. Ensure only qualified or trained users are allowed to operate
the tool.
SERVICE
a.
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Any changes or modification to the wiring must be carried out by suitably
qualified personnel.
A qualified electrician should correctly size and install residual current devices
to protect the power supply. The fitment of additional surge protection is
recommended.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Ensure that the installation will comply with all applicable local regulations.
6. Standards and Approvals
CTick – ACN002 123 337
Patent
Pending
2020902087
