![background image](http://html2.mh-extra.com/html/abba/sts600/sts600_installation-manual_3045641010.webp)
www.ABBALightingUSA.com
Press the up and down buttons simultaneously to select the astro icon.
Press the enter button to confirm the selection. The astro icon and ".00" icon will start
blinking.
Press the enter button once more to activate the half sunrise button, which will also
shine.
Press the enter button to complete the astronomic auto ON and OFF mode setting.
Please note that this mode is the default mode for the astronomic feature.
When you observe the astro icon and ".00" blinking, utilize the up and down buttons to
adjust the start ON time.
You can set the start ON time to be 10-15 minutes advanced or delayed from the
actual sunset time.
Press the enter button to confirm your selected ON time.
When you notice the clock AM/PM icon and half sunrise icon blinking, it indicates that
the device is ready for the end OFF time configuration.
Utilize the up and down buttons to select the desired specific time.
Press the enter button to confirm the selected end OFF time.
Always remember to press the enter button after selecting the desired hours and
minutes.
Astronomic timer
: The device offers an astronomical mode that aligns with your local
sunrise and sunset times. It is specifically designed for indoor use in areas with inadequate
natural lighting. Please ensure that you have selected your location from the provided city
code sheet by referring to the "location" icon.
To set the astronomic auto ON and OFF mode, follow these steps:
1.
2.
3.
4.
Optional setings
To configure the optional ON time setting, follow these instructions:
1.
2.
3.
Optional Specific OFF time setting
To set a specific end OFF time, follow these steps:
1.
2.
3.
4.
The LCD display will show the loading consumption rate, and you will notice a blinking
overload warning icon.
The device incorporates built-in protection against overloads and short circuits. To
activate and reset this protection, simply press the MODE button.
2 x 300W independent mode setting zones;
2x COM/ 12V or 15V output x3 lines
Tooless quick connectors/taps