![background image](http://html1.mh-extra.com/html/abba/spb05/spb05_installation-manual_3301541003.webp)
Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
www.ABBALightingUSA.com
FIXTURE
LENS
BULB
FIXTURE
LENS
5.
6.
7.
To ensure optimal performance and safety, it is important to
use our fixtures ONLY with a low voltage landscape
transformer. This transformer reduces the voltage from
120V to 12V, making it safe and suitable for outdoor use.
When installing the fixture(s), please follow these
instructions carefully:
1. Before installation, please ensure that the power is turned
off for your safety.
2.To establish a dependable and enduring electrical
connection between fixture wires and the main line in
outdoor or underground installations, it is essential to select
a suitable main cable connector designed for direct burial.
This connector should be chosen based on its ability to
withstand environmental conditions, resist moisture and
corrosion, and provide robust insulation. By adhering to
industry standards and best practices, including proper wire
stripping and secure fastening techniques, a reliable
connection can be established, ensuring optimal
performance, safety, and longevity of the system.
We recommend using WN12 waterproof wire nuts (sold
separately) for optimal connectivity.
3. Attach the fixture(s) wires to the main cable connector
suitable for direct burial and use waterproof wire nuts.
WN12
(Sold separately).
4. For a secure and stable mounting, dig a small hole and
insert the spike into the ground, ensuring it is vertical and
firm.
5. Remove the lens from the fixture.
6. Insert the bulb with the correct wattage.
CAUTION: Do not exceed maximum
wattage on the fixture.
7. Place the lens back onto the fixture.
8. Adjust the light angle.
9. Turn on the power.
We strongly recommend that the main cable from the transformer be buried
underground for safety reasons. Additionally, please be sure to avoid
exceeding the maximum wattage on the fixture(s) to prevent any damage or
hazards.