ABB-Welcome
|
— 42 —
4.2.10.4 Call code settings
Fig. 35 Call code settings
To the “call code settings” menu has the following functions:
No.
Functions
1
Code type
- Change the code type by ticking the box (autom atic switchover) or
pressing the “plus/minus” buttons.
- A user can select and click on a physical address to call an indoor
station.
- A user can select and click on a logic address. (The logic address is set
in the “user list management” menu.)
2
Digit
- When choosing a logic address, you should set the digits of the logic
address by using the “plus/minus” buttons. (01-08 digits are available,
and the digits of the logic address must be consistent with the ones set in
the “user list management” menu.)
3
“OK”
- Click on this button to save the settings.
4
“Back”
- Click on this button to return to the start page.
Back
CALL CODE SETTING
Physical Address
OK
-
3
4
1
2
Code Type
05
Digit
+
