ABB Welcome M2303, Руководство по эксплуатации продукта

Страница: 13 / 55

ABB-Welcome
| — 13 —
4.2.3 Intercept mode
Pos: 31 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/ Tue r o effne n - 832 20-AP-x xx @ 20\m od_ 132 326 795 847 9_15 .docx @ 1 121 09 @ @ 1
Fig. 7 Intercept mode
In the “intercept mode”, following functions are available:
No. Function
1 Activate or deactivate the intercept function by ticking the checkbox
2 Activate the intercept function to intercept calls for all users or for VIPs
only.
- ”All” means that the guard unit will intercept calls for all users.
- “VIP” means that the guard unit will intercept calls for VIPs only.
3 Set VIPs (if applicable)
- Click on this button to set the VIPs.
4 Choose the type of intercept by ticking the checkbox
- Choose from "permanent" mode or "repeat" mode.
5 “plus/minus” buttons.
6 Back
- Click on this button to return to the start page without saving the settings.
7 OK
- Click on this button to save the settings.
8 In the “repeat” mode, the timer(s) must be activated by ticking the
checkbox.
Back
INTERCEPT
× Intercept For
ALL
Type
Permanent
Start Time 1
× 08 30 × 18 30
Start Time 2
End Time 1
08 30 18 30
End Time 2
OK
-
+
Set VIP
1
5
2 3
8
4
7
6